...
Only one manual approval rule can be active for a specific client at a time.
...
Quantity Tolerances
This feature allows you to set specific thresholds for quantity tolerances and define approval processes to ensure standards are met.
The Approval rule for this is set for the Client per Transport Mode.
To add a new approval rule for quantity tolerances (either under or over a certain amount), you'll need to:
...
Viewing Active Rules: Quantity Tolerance grid shows all currently active approval rules.
Deleting Rules: If you have the necessary permissions, you can delete existing rules.
Updating Rules: You can modify existing rules by editing the tolerance values and saving the changes.
...
Quantity Tolerance Over (%) - If the line tolerance % is a positive number and is less than than the Quantity Tolerance Over Approval value set up for the relevant Client and Shipment transport mode, then this rule has passed (within tolerance).
Eg:
tolerance % =1%, Approval value = 2% passes validation
tolerance % = 6%, Approval value = 2% fails validation
Quantity Tolerance Under (%) - If the line tolerance % is a negative number and is greater than than the Quantity Tolerance Under Approval value set up for the relevant Client and Shipment transport mode, then this rule has passed (within tolerance).
Eg:
tolerance % = -1%, Approval value = -2% passes validation
tolerance % = -6%, Approval value = -2% fails validation
Unbooked PO Lines
This setting controls whether unbooked purchase order lines require approval.
...
Only one validation rule can be active for a specific client at a time.
...
When enabled, this rule requires that whenever one line is assigned to a shipment for a given purchase order, then ALL lines from that purchase order must also be assigned
If one or more lines remain unassigned then this rule has failed
Unmatched PO Lines DC/Consignee Country
...
Toggle “YES” to enable unmatched Country of the DC and Consignee to be approved before proceeding.
Toggle “NO” if unmatched PO lines country can be processed without approval.
...
IF ENABLED:
For Shipments - this rule requires that the DC country of all PO Lines on a Shipment are the same as the Consignee country
For Bookings - this rule requires that the DC country of all PO Lines on a Shipment are the same as the country of the Consignee address selected
If one or more lines do not match, then this rule has failed
Consignee Set Up
This feature allows you to set specific target dwell times for consignees and define approval processes to ensure timely deliveries.
The Approval rule for this is set for the Client per Consignee per Transport Mode per Container Mode.
Adding a New Required-by-Date Met Approval Rule:
...
Managing Existing Required-by-Date Met Approval Rules:
Viewing Active Rules: The "DCMApprovalTargetDwellTimes" Target Dwell Times grid shows all currently active required-by-date rules for consignees.
Deleting Rules: If you have the necessary permissions, you can delete existing rules.
Updating Rules: You can modify existing rules by editing the target dwell times and saving the changes.
Container Utilisation
This feature allows you to set minimum CBM requirements for specific equipment types and define approval processes to optimize container utilization.
The Approval rule for this is set for the Client per Transport Mode per Container Size.
Adding a New Container Utilization Approval Rule:
...
Managing Existing Container Utilization Approval Rules:
Viewing Active Rules: The "DCMContainerUtilization" Container Utilization grid shows all currently active container utilization rules (Equipment, Allow, Min CBM).
Deleting Rules: If you have the necessary permissions, you can delete existing rules.
Updating Rules: You can modify existing rules by editing the minimum CBM value and the "Allow" switch, and then saving the changes.
...
If no rule is in place for the equipment type then the approval rule
passesIf the Container Expected CBM < Min CBM then the approval rule
failsIf the Container Expected CBM >= Min CBM then the approval rule
passes