Replenishment is an integral part of effective warehouse management. Replenishment is the process of getting inventory from bulk/reserve storage locations to more accessible and compact, forward pick locations. JASCI provides proactive (maintenance) and reactive (demand based) inventory replenishment workflows to ensure enough inventory is available in a pick location prior to operators being sent to the location to pick an order.
Setting Up Replenishments
Automated replenishment is configured at the location level in order for JASCI to determine what needs to be replenished and how much can fit in that location. This can be found in the Replenishment Controls area.
Replenishment Check
JASCI will check the levels against the minimum during the picking process. It will also check all locations (setup for bulk replenishment) on a schedule that runs regularly.
Inventory Availability
If the check determines a location is ready to be replenished, JASCI looks for stock available for replenishment. In order for stock to qualify as replenishment stock, it must be stored in the Area marked for as replenishment stock. This is most commonly a BULK storage area. Stock in other areas, such as quarantine stock or stock awaiting put away, will not qualify unless its location is flagged as such.
If available inventory is not found in a replenishment location, the location will wait for stock to be available.
LETDOWN methodology will pull the full quantity from a location to refill the replenishment location.
LETDOWN vs. RESTOCK
RESTOCK methodology will pull partials or full quantities in order to fulfill the maximum quantity as configured for the replenishment location.