WMS - Replenishment (Mobile Scanning)

Forced Replenishment - Bulk to Pick Face

Forced Replenishment will attempt to create a replenishment record based on the SKU the user has entered on the mobile device. This Type of Replenishment is used when immediate Replenishment is needed, no need to wait for System schedule.

1. Go to Warehouse management → Replen

2. Tap the “Replen” icon on the Mobile Menu.

3. Select a client from drop-down, select Type - (Forced), then click the Next button.

4. Scan the Pick Face Location and scan the SKU. Then, click the Next Button.

5. Scan the Bulk Location and scan the SKU. Then, click the Next Button.

6. Enter the quantity to pick from the Bulk Location. Then, click the Next Button.

7. Scan the Pick Face Location and scan the SKU. Enter the Quantity to Put Away to the pick face location. Then, click the Next button.

8. The replenishment record is now complete and stock has been moved from Bulk to Pick Face.

Open

System Replenishment - Bulk to Pick Face

System replenishment is a scheduled job that will run every night and will create replenishment record the night after.

1. Go to Warehouse management → Replen

2. Tap the “Replen” icon on the Mobile Menu.

3. Select a client from drop-down, select Type - (System), then click the Next button.

4. To retrieve oldest replenishment, set Allocation Sequence to Oldest Record.

5. To retrieve the next record in the picking sequence, set Allocation Sequence to Pick Sequence.

6. Set Floor Spot to No. Then, click the Next button.

7. Scan the Bulk Location and Scan the SKU. Then, click the Next button.

8. Enter the Quantity Picked from the bulk location. Then, click the Next button.

9. Scan the Pick Face Location and Scan the SKU. 

10. Next, enter the Quantity to Put Away to the pick face location. Then click the Next button.

11. The replenishment record is now complete and stock has been moved from Bulk to Pick Face.

Open

System Replenishment - Bulk to Floor Spot

1. Go to Warehouse management → Replen

2. Tap the “Replen” icon on the Mobile Menu.

3. Select a client from drop-down, select Type - (System), then click the Next button.

4. To retrieve oldest replenishment, set Allocation Sequence to Oldest Record.

5. To retrieve the next record in the picking sequence, set Allocation Sequence to Pick Sequence.

6. Set Floor Spot to Yes. Then, click the Next button.

7. Scan the Bulk Location and Scan the SKU. Then, click the Next button.

8. Enter the Quantity Picked from the bulk location. Then, click the Next button.

9. Enter Floor Spot Location, SKU and Quantity Spotted.

10. Stock has been moved from Bulk to Floor Spot.

Floor Spot to Pick Face

1. Go to Warehouse management → Floor Spot Replen

2. Select Client from drop-down and click the Next button.

3. Scan Floor Spot Location, SKU and click the Next button.

4. Enter the Quantity Picked from the Floor Spot Location. Then, click the Next button.

5. Scan the Pick Face Location and SKU. Then, enter the Quantity to Put Away to the pick face location.

6. Once done, the replenishment record is now complete and the stock has been moved from Floor Spot location to Pick Face location.

Replenishment Notes

1. If the user have to pick/put away less than the quantity to replenish, a count record will automatically be created for this location. See Also: WMS - Count Types | 5. Movement Exception

2. When a replenishment record was left unfinished in Mobile, the system let you continue where you left off.

3. Replenishment details (Pick Face Capacity, Bulk Capacity, Replenishment Level) may be changed before a replenishment record was created.

4. Replenishment record needs to be completed first as a specific pending replenishment record locks stocks and may affect the outcome of other process in the system.