Pick & Pack "Single" Sales Orders

Owned by Leyda Telles (Unlicensed)
Last updated: May 26, 2023
3 min read

Single Sales Orders

The “Single” work type will be assigned by JASCI when a sales order of a single line, single quantity is requested. (e.g SKU: Simple123, QTY: 1)

Step 1: Open “Cluster Pick”

  • The operator will begin by opening the “Cluster Pick” mobile function.

 

Step 2: Scan Work Zone and Tote

  • The operator scans the work zone.

    • Work zone: DEFAULT

    • Note JASCI is case sensitive!

  • The operator proceeds to scan the pick tote.

    • OPEN sales orders are allocated to the pick tote at this point.

    • The tote/cart ID is not the LPN.

 

Step 3: Verify Location

  • The operator is directed to a location.

    • The operator will verify the location by scanning the location bar code.

 

Step 4: Pick Product

  • The operator picks the product from the direct location.

    • Product details will be displayed.

    • If the product is not in the directed location, select the “Cut” button.

    • If the product is in the directed location but the expected quantity is not, select the “Cut" button.

  • The operator scans the product barcode.

    • If the product barcode does not scan, notify a supervisor.

 

Step 5: Scan Tote LPN

  • The operator scans the tote LPN and transfers the picked product into the tote.

    • The tote LPN is not the tote ID.

 

Repeat: 3 - 5

  • Repeat steps 3 - 5 for all sales orders allocated to the tote.

  • Once all orders are picked the operator is prompted to “Confirm Drop off All” .

    • The operator drops off the pick cart at the packing station.

 

Step 6: Open “Pack Singles”

  • On the desktop the operator opens the “Pack Singles” menu option.

    • 2 - Outbound > Packing > Pack Singles

 

Step 7: Open Packing Station

  • The operator scans the packing work bench.

  • The operator scans the tote/cart ID.

  • The operator scans the tote/cart LPN

 

Step 8: Begin Packing

  • A list of all products in the tote will generate.

    • This “tote” only has 1 product, meaning there is only 1 sales order being fulfilled.

  • The operator scans each individual product.

    • The operator will scan a random product from the tote.

    • The product scanned will be allocated to a sales order. (e.g if there are two sales orders with the same SKU.)

  • The operator proceeds to enter the weight, box size, carrier and service level if the following information is not already provided.

  • The operator selects “Process Shipment”.

 

REPEAT

The operator repeats step 8 for all single sales orders allocated to the tote!